|
|
Revised Water Damage Plan
New procedure used to clean up water spills due to floods in classrooms:
- Remove all furniture, cabinets, any item attached to the walls, or in the classroom to a dry room.
- Inspect the room for any evidence of mold or mildew using a moisture meter, determine if floors or walls are holding moisture.
- Clean all water using a wet/dry vacuum for the tile, for carpet use a carpet extractor.
- If you find any evidence of mold or mildew contact the business office or the district safety officer.
- DO NOT CLEAN UP MOLD OR MILDEW UNTIL INSTRUCTED TO DO SO.
- Confer with deputy superintendent and determine if sampling is needed and what type of sampling.
- Confer with deputy superintendent to repair or replace damaged or flooded materials. i.e. carpets, floor tile, insulation, wallboard, etc...
- After given direction completely clean all areas that were wet with the proper disinfectant in the proper dilution.
- After given direction clean all furniture, and cabinets, remove from classroom, any cabinets that were damaged due to water damage will be evaluated and if necessary be disposed of.
- Use the districts air ventilation equipment to enhance the drying of the classroom.
- From testing determine what remediation need to be done.
- Receive Clearance to reoccupy the room from the deputy superintendent.
|
|
